|
NOTE: THIS MACHINE WAS PURCHASED NEW IN 2004 BUT NEVER INSTALLED. IT IS IN
STORAGE, MUCH OF IT IN THE MANUFACTURER'S ORIGINAL CRATES. PURCHASE PRICE NEW
IN 2004 WAS $2.2 MILLION EUROS. PURCHASER MUST SUPPLY MELTING AND HOLDING
FURNACES OR MACHINERY INTERNATIONAL CAN SUPPLY THEM SEPARATELY. THIS IS A
GREAT OPPORTUNITY TO ACQUIRE A HIGH QUALITY BRAND NEW THREE STRAND COPPER
BILLET CASTING LINE.
MACHINE# 10509
SPECIFICATIONS:
MANUFACTURER: O.C.N. SPA (ITALY)
YEAR OF MANUFACTURE: 2004 (NEVER INSTALLED)
TYPE: VERTICAL CONTINUOUS COPPER BILLET CASTER
No. OF BILLET STRANDS:
CAST SIMULTANEOUSLY: 3
BILLET DIAMETER:
MINIMUM: 6" (152mm)
MAXIMUM: 14" (355mm)
PRESENTLY TOOLED FOR: 14" (355mm
RATED CAPACITY 16 TO 18 METRIC TONS PER HOUR
MELTING & HOLDING FURNACES: TO BE SUPPLIED SEPARATELY BY PURCHASER
BILLET MOLDS: STAINLESS STEEL WATER JACKETED
BILLET COOLING:
STAGE 1 : WATER BOX BELOW MOLD SYSTEM
STAGE 2 : TWIN FLOATING RUBBER SEALS PLUS AIR SPRAY
NOZZLES ASSURE A DRY BILLET AT EXIT TO
ELIMINATE OXIDATION.
PINCH ROLL FEED:
TYPE: STAINLESS STEEL ROLLS
No. OF ROLLS: FOUR ROLLS AT EACH BILLET
CASTING SPEED: 50mm - 150mm/MIN. (2 - 6 IPM)
ALLOY: DHP COPPER
OUTPUT: 15 METRIC TONS/HR.
FLYING CUTOFF SAW:
SAW BLADE DIAMETER: 1400mm (55")
CUTOFF LENGTHS: 700mm - 1500mm (27.5"- 59")
DRIVE MOTOR: 90 kW
SAW FEED RANGE:
CUTTING STROKE: 2.5mm - 25mm/SEC. (0.1 - 1 IN./SEC.)
AVERAGE CUTTING STROKE: 15mm/SEC. (0.6 IN./SEC.)
MAXIMUM IDLE SPEED: 100mm/SEC. (4 IN./SEC.)
RETURN SPEED: 100mm/SEC. (4 IN./SEC.)
TOLERANCE OF SAW CUT: +/-3mm (0.12")
VACUUM CHIP COLLECTING SYSTEM
SYSTEM HYDRAULIC DRIVE: 50kW
MICROPROCESSOR SYSTEM FOR MAXIMUM AUTOMATION TO SET UP A NEW PROGRAM,
OPERATOR ONLY INPUTS:
1. MAXIMUM CUTTING FEED RATE ON POTENTIONMETER
2. MAXIMUM SYSTEM WORKING PRESSURE
3. CASTING SPEED
4. CASTING LENGTH
CHIP COLLECTING SYSTEM:
VACUUM SYSTEM
CYCLONE UNIT: 30kW BLOWER DRIVE
HOPPER SECTION FOR CHIP STORAGE
CHIP DISCHARGE VALUE
CUT BILLET DOWNENDER:
RECEIVING BASKET: HYDRAULIC TO MINIMIZE IMPACT
DOWNENDER: TRANSFERS CUT BILLET FROM VERTICAL
TO HORIZONTAL ALIGNMENT
BILLET DISCHARGE INTO A DRIVEN
ROLLER DRIVEN CONVEYOR: EJECTOR PLATE PUSHER
BILLET ELEVATOR: TO ELEVATE BILLET BACKUP TO GROUND LEVEL
POWER INPUT: 440 VOLTS, 3 PH., 60 Hz
GENERAL ELECTRIC PROGRAMMABLE CONTROLS: SCR THYRISTOR
VICKERS HYDRAULIC
WATER COOLING SYSTEM:
No. OF PUMPS: TWO (ONE IN OPERATION; ONE BACKUP)
PUMP DRIVE: 100kW, 1750 RPM, 3 PH., 60 Hz
FLOW RATE: 375 CBM/HR.
PIPING NOT INCLUDED.
ESTIMATED SHIPPING REQUIRED: (10) x 40 FT. CONTAINERS OR FLATBEDS
THIS BILLET CASTING LINE WAS MANUFACTURED NEW IN 2004 BUT NEVER INSTALLED.
IT IS PRESENTLY IN STORAGE.
**PRICE QUOTED IS EX WORKS AS IS WHERE IS SUBJECT TO PRIOR SALE**
**ALL SPECIFICATIONS ARE SUBJECT TO VERIFICATION BY PURCHASER**
| Machinery International Corporation | Contact Us | Email Sales Department | 203.484.0400 |