26" x 54", SKODA,, NON REV WARM/COLD MILL 25mm - .120mm (11532)   Our stock number: 11532

26 x 54 , SKODA,, NON REV WARM/COLD MILL 25mm - .120mm (11532)

Click on picture below for larger version
26 x 54 , SKODA,, NON REV WARM/COLD MILL 25mm - .120mm (11532)26 x 54 , SKODA,, NON REV WARM/COLD MILL 25mm - .120mm (11532)26 x 54 , SKODA,, NON REV WARM/COLD MILL 25mm - .120mm (11532)26 x 54 , SKODA,, NON REV WARM/COLD MILL 25mm - .120mm (11532)
26 x 54 , SKODA,, NON REV WARM/COLD MILL 25mm - .120mm (11532)26 x 54 , SKODA,, NON REV WARM/COLD MILL 25mm - .120mm (11532)26 x 54 , SKODA,, NON REV WARM/COLD MILL 25mm - .120mm (11532)26 x 54 , SKODA,, NON REV WARM/COLD MILL 25mm - .120mm (11532)


MACHINE # 11532

We are pleased to offer for your immediate consideration, subject to remaining

unsold, the following used equipment

2 Hi Breakdown/Intermediate Sheet Mill

Type                         2 Hi Non Reversing Cold/Warm Mill
Manufacturer                 SKODA
Year                         1961
Direction                    Right to Left
Speed 1                      0 to 60 m/min (to be confirmed)
Speed 2                      To be confirmed

Roll  Face Width             1375 mm
Nominal Rolling Width        1250 mm 
Roll Dia                     650 mm

Thickness Range              8  mm to 3 mm Flat to Coil (to be confirmed)
                             25 mm Flat to Flat (to be confirmed)

Bearings                     Greased Roller
Roll Balance                 Hydraulic

Screwdown                    Electromechanical
Screwdown Drive              Two Braked AC Electric Motors with Interconnecting
                             clutch through two Worm Reduction gearboxes and

                             Screwdown Gearboxes to Screwdown Screws
Screw Pitch                  15 mm
Screw Dia                    280 mm 
Housing Section              470 mm x 445 mm


Main Drive 1                 DC Motor through pinion first stage reduction 
                             Gearbox, second stage reduction gearbox and
                             separate splitter box to Work Roll Drive

                             Spindles 
Main Motor Drive 1           500 KW DC, 315/1000 rpm, 440 V, 1240 A


Main Drive 2                 DC Motor direct to second stage reduction 
                             gearbox and separate splitter box to Work Roll
                             Drive Spindles
Main Motor Drive 2           To be confirmed

Mill Drive Spindles          365 mm Dia 


Recoiler 

Capacity                     3,000 Kg (estimated)
Width                        1250 mm
Coil Inside Dia              500 mm
Snubber                      Pneumatic
Drive                        DC Motor through Reduction Gearbox to Recoiler Mandrel
Recoiler Motor Detail        290 KW DC, 380/1200 rpm, 420 V, 790 A


Note - Whilst still available, it is recommended that all electrical controls

and hydraulics be replaced on this mill


Spare Rolls                  

2  Off                       Rolls with Chocks and Bearings
3  Off                       Rolls



Please Note - Care is taken to give accurate and reliable descriptions, but

these are not guaranteed, and prospective purchasers are advised to check any

vital details.


**PRICE QUOTED IS EX WORKS AS IS WHERE IS SUBJECT TO PRIOR SALE**

 **ALL SPECIFICATIONS ARE SUBJECT TO VERIFICATION BY PURCHASER**

For a quote on this machine, please complete the form below or contact us directly.

Company:
Contact:
Email:
Address:
City St ZIP:
Tel:
Fax:

How did you hear of us?
Additional information on your request:
   

Please enter text from above:

 |  Machinery International Corporation  |  Contact Us  |  Email Sales Department  |  203.484.0400  | 

RETURN to listing display       RETURN to our home page