1 5/8" - 1/2", MITCHELL, HYDRAULIC PUSH POINTER (10391) Machinery International Corp

1 5/8" - 1/2", MITCHELL, HYDRAULIC PUSH POINTER (10391) Our stock number: 10391

1 5/8 - 1/2 , MITCHELL, HYDRAULIC PUSH POINTER (10391)

Click on picture below for larger version


MACHINE# 10391

SPECIFICATIONS:              
  MANUFACTURER:              GEORGE A. MITCHELL CO.
  TYPE:                      HYDRAULIC PUSH POINTER FOR TUBES

SIZE RANGE:
  MAXIMUM TUBE O.D.:         1 5/8" (41.25 mm)
  MINIMUM TUBE O.D.:           1/2"  (12.7 mm)
  RATED:                     5,000 LBS. @ 1060 PSI
  MAXIMUM:                   9,400 LBS. @ 2000 PSI

CLAMPING CAPACITY:
  RATED:                     13,320 LBS. @ 1060 PSI
  MAXIMUM:                   25,132 LBS. @ 2000 PSI

POINTING DIES:               3" O.D x 2" THICK
                             POINTING DIES (BY CUSTOMER)

DIE CAVITY:                  (2) 3.010" DIA. x 2 1/16" W. "U" SHAPED

POINTING SPEEDS:
  ADVANCE:                   353 IPM @ 1000 PSI
  RETRACT:                   265 IPM @ 1000 PSI

TRAVELING OF DIES:           10"
OPENING OF CLAMP:            1 7/8"
TUBE GRIPPER JAWS:           2 1/4" SQ. x 7" LG.
HYDRAULIC RESERVOIR:         20 GALLON
HYDRAULIC FLUID:             PETROLEUM OIL 150-315 SUS @ 100 DEG. F.

                             ANTIWEAR TYPE INDUSTRIAL HYDRAULIC OIL
HYDRAULIC PUMP:
  (DRIVEN @ 1800 RPM):       7.2 GPM @ 1000 PSI

PUMP DRIVE MOTOR:            10 HP, 1800 RPM, 230-460 V, 3 PH,
                             60 CYCLE, FRAME #215T OPEN PROTECTED

MOTOR STARTER:               SIZE 1 COMBINATION WITH FUSE DISCONNECT
CONTROL CIRCUIT:             115 VOLTS

**PRICE QUOTED IS EX WORKS AS IS WHERE IS SUBJECT TO PRIOR SALE**

 **ALL SPECIFICATIONS ARE SUBJECT TO VERIFICATION BY PURCHASER**

RETURN to listing display RETURN to our home page

Company:
Contact:
Email:
Address:
City St ZIP:
Tel:
Fax: