3 1/2", MITCHELL 33,000LB, THREE(3) DIE HYD TUBE PUSH POINTER (11662)   Our stock number: 11662

3 1/2 , MITCHELL 33,000LB, THREE(3) DIE HYD TUBE PUSH POINTER (11662)

Click on picture below for larger version
3 1/2 , MITCHELL 33,000LB, THREE(3) DIE HYD TUBE PUSH POINTER (11662)3 1/2 , MITCHELL 33,000LB, THREE(3) DIE HYD TUBE PUSH POINTER (11662)3 1/2 , MITCHELL 33,000LB, THREE(3) DIE HYD TUBE PUSH POINTER (11662)3 1/2 , MITCHELL 33,000LB, THREE(3) DIE HYD TUBE PUSH POINTER (11662)
3 1/2 , MITCHELL 33,000LB, THREE(3) DIE HYD TUBE PUSH POINTER (11662)3 1/2 , MITCHELL 33,000LB, THREE(3) DIE HYD TUBE PUSH POINTER (11662)3 1/2 , MITCHELL 33,000LB, THREE(3) DIE HYD TUBE PUSH POINTER (11662)

MACHINE #11662

SPECIFICATIONS

 -MANUFACTURER:              GEORGE A. MITCHELL COMPANY

 -TYPE:                      HYDRAULIC THREE(3) DIE TUBE PUSH POINTER      

                             -VERTICAL DIE SLIDING TYPE

 -POINT LENGTH:              INFINITE BY ADJUSTABLE POINT LENGTH

 -CAPACITY
  -RATED:                    33,000 LBS @ 2000 PSI
  -MAXIMUM:                  41,480 LBS @ 2500 PSI

 -POINTING SPEEDS
  -ADVANCE:                  303 IPM @ 2000 PSI
  -RETRACT:                  454 IPM @ 1000 PSI

 -AUTOMATIC CYCLE:           ONE(1), TWO(2) OR THREE(3) PUSH

 -DIE SIZE:                  6" O.D. X 2 1/2" THICK
 -DIE HOLDER:                THREE(3) HOLE VERTICAL DIE SLIDE WITH THREE(3)
                             6.010" DIA X 3.030" DEEP CAVITIES

 -HYDRAULIC RESERVOIR:       100 GALLON CAPACITY

 -HYDRAULIC PUMPS:           SINGLE VANE PUMP
                             21.4 GPM @ 2000 PSI @ 1200 RPM
                             SINGLE VANE PUMP
                             11.4 GPM @ 1000 PSI @ 1200 RPM

 -HYDRAULIC DRIVE MOTOR:     30 HP, 1200 RPM AC

 -MAIN POWER SUPPLY:         460 VOLT 3 PHASE 60 HZ

 -CONTROL VOLTAGE:           110 VOLT FROM TRANSFORMER

 -CONTROL LOGIC:             PLC

 -MACHINE PASSLINE HEIGHT:   3'- 6"

 -TYPICAL MACHINE CYCLE
  TIME TO PRODUCE 6" LONG 
  POINT (NOT INCLUDING 
  HANDLING TIME):            ONE(1) PUSH=    4 SEC
                             TWO(2) PUCH=    9 SEC
                             THREE(3) PUSH= 15 SEC

**PRICE QUOTED IS EX-WORKS AS IS WHERE IS SUBJECT TO PRIOR SALE**

 **ALL SPECIFICATIONS ARE SUBJECT TO VERIFICATION BY PURCHASER**

For a quote on this machine, please complete the form below or contact us directly.

Company:
Contact:
Email:
Address:
City St ZIP:
Tel:
Fax:

How did you hear of us?
Additional information on your request:
   

Please enter text from above:

 |  Machinery International Corporation  |  Contact Us  |  Email Sales Department  |  203.484.0400  | 

RETURN to listing display       RETURN to our home page