|
MACHINE #11660
SPECIFICATIONS
-MANUFACTURER: GEORGE A. MITCHELL COMPANY
-TYPE: DOUBLE & SINGLE BUTTED TUBE EXTRUSION MACHINE
-MACHINE IS DESIGNED TO REDUCE VARIOUS DIAMTERS
OF TUBING WHILE AT THE SAME TIME PRODUCING
VARIOUS WALL THICKNESS THROUGH AN EXTRUSION TYPE
PROCESS.
-MAXIMUM PART LENGTH: 33" FINISHED
-CAPACITY
-MANDREL CROSSHEAD PUSH: 60,000 LBS @ 2120 PSI
-MANDREL CROSSHEAD PULL: 30,000 LBS @ 1910 PSI
-STRIPPER CROSSHEAD PULL: 45,000 LBS @ 2122 PSI
-SPEEDS
-MANDREL CROSSHEAD ADVANCE: 237 IPM @ 2000 PSI
-MANDREL CROSSHEAD RETRACT: 445 IPM @ 1000 PSI
-STRIPPER CROSSHEAD ADVANCE: 252 IPM @ 500 PSI
-STRIPPER CROSSHEAD RETRACT: 337 IPM @ 500 PSI (NO LOAD)
316 IPM @ 2000 PSI (UNDER LOAD)
-MAXIMUM TRAVEL OF MANDREL
CROSSHEAD: 48"
-MAXIMUM TRAVEL OF STRIPPER
CROSSHEAD: 48"
-LOADING OF MANDREL: MANUALLY ONTO PIVOTALLY RAISED MANDRELS
-UNLOADING: GRAVITY DISCHARGE ONTO EXIT RAMP
-DIE HOLDER THREE (3) POCKETS- EACH TO ACCOMODATE ONE(1) DRAW
DIE, ONE(1) LUBE RING (IF NECESSARY) AND ONE(1)
GUIDE DIE (IF NECESSARY)- WITH SPHERICAL SEAT FOR
FINE ADJUSTMENT
-HYDRAULIC RESERVOIR: 100 GALLON CAPACITY
-HYDRAULIC PUMPS: SINGLE VANE PUMP
27.3 GPM @ 2000 PSI @ 1200 RPM
SINGLE VANE PUMP
4.7 GPM @ 1000 PSI @ 1200 RPM
-HYDRAULIC DRIVE MOTOR: 40 HP, 1200 RPM AC
-HYDRAULIC MOTOR STARTER: SIZE 3 COMBINATION W/FUSED DISCONNECT
IN NEMA 12 ENCLOSURE
-MAIN POWER SUPPLY: 460 VOLT 3 PHASE 60 HZ
-CONTROL VOLTAGE: 110 VOLT FORM TRANSFORMER
-PROGRAMMABLE CONTROLLER: ALLEN BRADLEY SLC 5/01
-MACHINE PASSLINE HEIGHT: 38"
-TYPICAL MACHINE CYCLE
TIME TO PRODUCE THREE (3)
30" LONG TUBE EXTRUSIONS
(NOT INCLUDING HANDLING
TIME): 22 SECONDS
-OVERALL FLOOR SPACE
NOT INCLUDING HYD UNIT: APPROXIMATELY 53" WIDE X 48" HIGH X
22'-9 1/2" LONG
**PRICE QUOTED IS EX-WORKS AS IS WHERE IS SUBJECT TO PRIOR SALE**
**ALL SPECIFICATIONS ARE SUBJECT TO VERIFICATION BY PURCHASER**
| Machinery International Corporation | Contact Us | Email Sales Department | 203.484.0400 |