10" x 6", WHA ROBERTSON, 2 STAND TANDEM, 8" X 6" 2ND STAND W/EDGER (10085) Machinery International Corp

10" x 6", WHA ROBERTSON, 2 STAND TANDEM, 8" X 6" 2ND STAND W/EDGER (10085) Our stock number: 10085

10 x 6 , WHA ROBERTSON, 2 STAND TANDEM, 8 X 6 2ND STAND W/EDGER (10085)

Click on picture below for larger version




MACHINE 10085

MANUFACTURER:                W H A ROBERTSON MACHINE
MODEL:                       TORMANCO (TORRINGTON)
TYPE:                        2 STAND TANDEM 2 HIGH WIRE FLATTENING MILL WITH
                             A TRAVERSING TAKE-UP REEL

LINE SPEED:                  0 TO 300 FPM (91mpm) APPROXIMATELY

THE LINE CONSISTS OF THE FOLLOWING:

MILL MOUNTED STRAIGHTENER

         TYPE:               5 ROLL UNDRIVEN
                             MOUNTED ON 1ST STAND MILL

         ROLL SIZE
          -DIAMETER:         3 3/4" (95.3mm) 
          -FACE WIDTH:       1 1/2" (38.1mm)

 -INCLUDES 1 PAIR(2) 2 1/2" (63.5mm) DIA X 7 1/4" (184.2mm) LONG RUBBER

  HORIZONTAL ENTRY GUIDE ROLLS

1ST STAND ROLLING MILL

         ROLL SIZE:          10" DIAMETER X 6" WIDTH  (254mm X 152.4mm)

         WINDOW OPENING:     10 1/2" (266.7mm)
         COLUMN SIZE:        4 1/2" X 4 1/4" (114.3mm X 108mm)

         SCREWDOWN TYPE:     MANUAL

         DRIVE MOTOR:        125HP (93kw) DC
                             800/1800 RPM
                             500 VOLTS
                             220 AMPS

         BEARINGS:           APPEARS TO BE ROLLER BEARINGS
                             GREASE LUBE

 -MILL IS EQUIPPED WITH ADJUSTABLE ENTRY GUIDE TABLE

EDGING STAND

         TYPE:               FRICTION (WAS ORIGINALLY A POWERED EDGER BUT DRIVE
                             SHAFT HAS BEEN REMOVED)

         ROLL SIZE
          -DIA:              6" (152.4mm)
          -FACE WIDTH:       2" (50.8mm)

         ADJUSTMENT:         MANUAL

 -ONE ROLL IS MISSING

2ND STAND

         ROLL SIZE:          8" DIAMETER X 6" WIDTH (203.2mm X 152.4mm) 

         WINDOW OPENING:     8 1/2" (215.9mm)
         COLUMN SIZE:        4 1/4" X 3 7/8" (108mm X 98.4mm)

         SCREWDOWN TYPE:     MANUAL

         DRIVE MOTOR:        50HP (37.3kw) DC
                             1750/2100 RPM
                             500 VOLTS
                             82.8 AMPS

         GEARBOX/REDUCER     
          -MANUFACTURER:     SEW-EURODRIVE
          -TYPE:             R132
          -RATIO:            11.96/1
          -TORQUE:           44,000 lb/in

         BEARINGS:           APPEARS TO BE ROLLER BEARINGS
                             GREASE LUBE

 -MILL IS EQUIPPED WITH EXIT GUIDE TABLE


TRAVERSE TAKE-UP REEL
         TYPE:               MILL DRIVEN VIA CHAIN

         CAPACITY:           1,000 LBS (454kg) APPROXIMATELY
         SHAFT DIAMETER:     3 3/8" (85.7mm)

         TENSION CONTROL:    AIR CLUTCH

         TRAVERSE TYPE:      MECHANICAL
         TRAVERSE RANGE
          -MINIMUM:          2" (50.8mm)
          -MAXIMUM:          12" (304.8mm)

         DRUM SIZE CAPABILITY (NO DRUMS INCLUDED)
          -MOUNTING HOLE:    APPROXIMATELY 3" (76.2mm)- (ACTUAL MANDREL SIZE
                             IS 2 7/8" (73mm)
          -WIDTH:            12" (304.8mm)
          -MAXIMUM O.D.:     32" (812.8mm)

 -EQUIPPED WITH VERTICAL/HORIZONTAL STOCK GUIDES.



**PRICE QUOTED IS EX-WORKS AS IS WHERE IS SUBJECT TO PRIOR SALE**

 **ALL SPECIFICATIONS ARE SUBJECT TO VERIFICATION BY PURCHASER**

RETURN to listing display RETURN to our home page

Company:
Contact:
Email:
Address:
City St ZIP:
Tel:
Fax: